features compliant with aec-q200 rev-c- stress test quali cation for passive components in automotive applications 100 % electrically compatible with all previous generations of 1812 smt devices compatible with pb and pb-free solder re ow pro les rohs compliant* and halogen free** surface mount packaging for automated assembly agency recognition: standard 4532 mm (1812 mils) footprint patents pending mf-msmf series - ptc resettable fuses *rohs directive 2002/95/ec jan 27, 2003 including annex. **bourns is using the de nition that appears to be the prevalent de nition used as the industry standard at this time. the bourns de nition of ?alogen-free?is: bromine (br) content: 900 ppm; chlorine (cl) content: 900 ppm; total br + cl content: 1500 ppm. speci cations are subject to change without notice. users should verify actual device performance in their speci c applications. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. environmental characteristics operating temperature ......................................... -40 ? to +85 ? maximum device surface temperature in tripped state .................................................... 125 ? passive aging ....................................................... +85 ?, 1000 hours ....................................... ........ ? % typical resistance change humidity aging...................................................... +85 ?, 85 % r.h. 1000 hours ............................. 5 % typical resistance change thermal shock ..................................................... +85 ? to -40 ?, 20 times ................................. ... ?0 % typical resistance change solvent resistance ............................................... mil-std-202, method 215 ................................... no change vibration ............................................................... mil-std-883c, method 2007.1, ........................... no change condition a electrical characteristics model v max. volts i max. amps i hold i trip resistance max. time to trip tripped power dissipation amperes at 23 ? ohms at 23 ? amperes at 23 ? seconds at 23 ? watts at 23 ? hold trip r min. r 1max. typ. mf-msmf010 60.0 40 0.10 0.30 0.70 15.00 0.5 1.50 0.8 mf-msmf014 60.0 40 0.14 0.34 0.40 6.50 1.5 0.15 0.8 mf-msmf020 30.0 80 0.20 0.40 0.40 6.00 6.0 0.06 0.8 mf-msmf020/60 60.0 40 0.20 0.40 0.40 6.00 1.5 0.15 0.8 mf-msmf030 30.0 10 0.30 0.60 0.30 3.00 8.0 0.10 0.8 mf-msmf050 15.0 100 0.50 1.00 0.15 1.00 8.0 0.15 0.8 mf-msmf075 13.2 100 0.75 1.50 0.11 0.45 8.0 0.20 0.8 mf-msmf075/24 24.0 40 0.75 1.50 0.11 0.45 8.0 0.20 0.8 mf-msmf110 6.0 100 1.10 2.20 0.04 0.21 8.0 0.30 0.8 mf-msmf110/16 16.0 100 1.10 2.20 0.04 0.21 8.0 0.30 0.8 mf-msmf110/24x 24.0 20 1.10 2.20 0.06 0.18 8.0 0.50 0.8 mf-msmf125 6.0 100 1.25 2.50 0.035 0.14 8.0 0.40 0.8 mf-msmf150 6.0 100 1.50 3.00 0.03 0.120 8.0 0.5 0.8 mf-msmf150/24x 24.0 20 1.50 3.00 0.03 0.120 8.0 1.50 1.0 mf-msmf160 8.0 100 1.60 2.80 0.035 0.099 8.0 2.0 0.8 mf-msmf200 8.0 40 2.00 4.00 0.020 0.080 8.0 3.0 0.8 mf-msmf250/16x 16.0 100 2.50 5.00 0.015 0.100 8.0 5.0 1.2 mf-msmf260 6.0 100 2.60 5.20 0.015 0.080 8.0 5.0 0.8 test procedures and requirements for model mf-msmf series test test conditions accept/reject criteria visual/mech. ......................................................... verify dimensions and materials ......................... .. per mf physical description resistance ............................................................ in still air @ 23 ? ................................... .............. rmin r r1max time to trip ........................................................... at speci ed current, vmax, 23 ? ..................... .... t max. time to trip (seconds) hold current ......................................................... 30 min. at ihold ........................................ ............. no trip trip cycle life ....................................................... vmax, imax, 100 cycles ................................. ....... no arcing or burning trip endurance ..................................................... vmax, 48 hours ..................................................... no arcing or burning solderability .......................................................... ansi/j-std-002 ........................................ ........... 95 % min. coverage ul file number .................................................... e174545 http://www.ul.com/ follow link to certi cations, then ul file no., enter e174545 csa file number .................................................. ca110338 http://directories.csa-international.org/ under ?erti cation record?and ?ile number? enter 110338-0-000 t?v certi cate number ....................................... r 02057213 http://www.tuvdotcom.com/ follow link to ?ther certi cates? enter file no. 2057213 *rohs compliant & aec approved
model abcd style min. max. min. max. min. max. min. mf-msmf010 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.10 (0.043) 0.30 (0.012) 1 mf-msmf014 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.10 (0.043) 0.30 (0.012) 1 mf-msmf020 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.10 (0.043) 0.30 (0.012) 1 mf-msmf020/60 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.10 (0.043) 0.30 (0.012) 1 mf-msmf030 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.10 (0.043) 0.30 (0.012) 1 mf-msmf050 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf075 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf075/24 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf110 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.45 (0.018) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf110/16 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.45 (0.018) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf110/24x 4.37 (0.172) 4.83 (0.190) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.60 (0.063) 0.30 (0.012) 2 mf-msmf125 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf150 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf150/24x 4.37 (0.172) 4.83 (0.190) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.60 (0.063) 0.30 (0.012) 2 mf-msmf160 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf200 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.55 (0.015) 0.85 (0.033) 0.30 (0.012) 1 mf-msmf250/16x 4.37 (0.172) 4.83 (0.190) 3.07 (0.121) 3.41 (0.134) 0.70 (0.028) 1.60 (0.063) 0.30 (0.012) 2 mf-msmf260 4.37 (0.172) 4.73 (0.186) 3.07 (0.121) 3.41 (0.134) 0.48 (0.019) 0.85 (0.033) 0.30 (0.012) 1 speci cations are subject to change without notice. users should verify actual device performance in their speci c applications. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. mf-msmf series - ptc resettable fuses product dimensions (see next page for outline drawings) dimensions: mm (inches) applications overcurrent and overtemperature protection of automotive electronics hard disk drives pc motherboards pc peripherals point-of-sale (pos) equipment pcmcia cards usb port protection - usb 2.0, 3.0 & otg hdmi 1.4 source protection packaging: mf-msmf010 through mf-msmf030 = 1500 pcs. per reel. mf-msmf050 through mf-msmf200 & mf-msmf260 = 2000 pcs. per reel. mf-msmf110/24x , mf-msmf150/24x & mf-msmf250/16x = 1500 pcs. per reel.
mf-msmf series - ptc resettable fuses a b c top and bottom view side view d top view style 2 style 1 bottom view side view recommended pad layout 8 c a b d c 2.95 ?0.10 (.114 ?.004) 3.1 ?0.10 (.122 ?.004) 1.68 ?0.05 (.066 ?.002) recommended pad layout 3.2 ?0.1 (0.126 ?.004) 2.7 ?0.1 (.106 ?.004) 1.5 ?0.05 (.059 ?.002) 1.5 ?0.05 (.059 ?.002) terminal material: electroless ni under immersion au termination pad solderability: standard au nish: meets ansi/j-std-002 category 2. recommended storage: 40 ? max./70 % rh max. product dimensions (see previous page for dimensions) typical time to trip at 23 ?c 0.001 0.01 0.1 1 10 100 0.1 1 10 100 mf-msmf020 mf-msmf030 mf-msmf200 mf-msmf014 mf-msmf010 mf-msmf050 mf-msmf075 mf-msmf075/24 mf-msmf110 mf-msmf110/16 mf-msmf125 mf-msmf150 mf-msmf160 mf-msmf260 fault current (amps) time to trip (seconds) the time to trip curves represent typical performance of a device in a simulated application environment. actual performance in speci c customer applications may differ from these values due to the in uence of other variables. speci cations are subject to change without notice. users should verify actual device performance in their speci c applications. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time.
?freexpansion design? is a trademark of bourns, inc. speci? cations are subject to change without notice. users should verify actual device performance in their speci? c applications. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. mf-msmf series - ptc resettable fuses thermal derating chart - i hold (amps) model ambient operating temperature -40 ?c -20 ?c 0 ?c 23 ?c 40 ?c 50 ?c 60 ?c 70 ?c 85 ?c mf-msmf010 0.16 0.14 0.12 0.10 0.08 0.07 0.06 0.05 0.03 mf-msmf014 0.23 0.19 0.17 0.14 0.12 0.10 0.09 0.08 0.06 mf-msmf020 0.29 0.26 0.23 0.20 0.17 0.15 0.14 0.12 0.10 mf-msmf020/60 0.29 0.26 0.23 0.20 0.17 0.15 0.14 0.12 0.10 mf-msmf030 0.44 0.39 0.35 0.30 0.26 0.23 0.21 0.18 0.15 mf-msmf050 0.77 0.68 0.59 0.50 0.44 0.40 0.37 0.33 0.29 mf-msmf075 1.15 1.01 0.88 0.75 0.65 0.60 0.55 0.49 0.43 mf-msmf075/24 1.15 1.01 0.88 0.75 0.65 0.60 0.55 0.49 0.43 mf-msmf110 1.59 1.43 1.26 1.10 0.95 0.87 0.80 0.71 0.60 mf-msmf110/16 1.59 1.43 1.26 1.10 0.95 0.87 0.80 0.71 0.60 mf-msmf110/24x 2.00 1.70 1.40 1.10 0.95 0.88 0.80 0.73 0.61 mf-msmf125 1.80 1.63 1.43 1.25 1.08 0.99 0.91 0.81 0.68 mf-msmf150 2.17 1.95 1.72 1.50 1.30 1.18 1.09 0.97 0.82 mf-msmf150/24x 2.10 1.90 1.70 1.50 1.25 1.13 1.00 0.88 0.69 mf-msmf160 2.30 2.20 1.90 1.60 1.45 1.30 1.15 1.03 0.91 mf-msmf200 3.08 2.71 2.35 2.00 1.80 1.60 1.50 1.40 1.25 mf-msmf250/16x 3.90 3.42 2.96 2.50 2.24 1.98 1.85 1.29 0.94 mf-msmf260 4.00 3.52 3.06 2.60 2.34 2.08 1.95 1.39 1.04 160?220 300 250 200 150 100 50 0 10?20 temperature ( c) 120 preheating soldering cooling time (seconds) solder re ow recommendations notes: ? mf-msmf models cannot be wave soldered. please contact bourns for hand soldering recommendations. ?if re ow temperatures exceed the recommended pro le, devices may not meet the performance requirements. ? compatible with pb and pb-free solder re ow pro les. ? excess solder may cause a short circuit, especially during hand soldering. please refer to the multifuse polymer ptc product soldering recommendation guidelines. how to order mf - msmf 075/24 - 2 multifuse product designator series msmf = 4532 mm (1812 mils) surface mount component hold current, ihold 010-260 (0.10 amps - 2.60 amps) higher voltage option __ = standard voltage /16 = 16 volt rated /24 = 24 volt rated /60 = 60 volt rated x = multifuse freexpansion design mf-msmf series packaging packaged per eia 481-1 -2 = tape and reel typical part marking represents total content. layout may vary. part identification examples: mf-msmf050 = 50 mf-msmf075 = 75 mf-msmf110 = 11 mf-msmf150 = 15 115y year code: 5 = 2005 bi-weekly date code: weeks 49-50 = y mf-msmf series, rev. ad, 02/13 part identification examples: mf-msmf110/24x = 6 mf-msmf150/24x = 8 mf-msmf250/16x = c bi-weekly date code: weeks 5-6 = c 8 c
mf-msmf-110/24x mf-msmf010 - mf-msmf050 - mf-msmf150/24x mf-msmf030 mf-msmf260 mf-msmf250/16x tape dimensions per eia-481-1 per eia 481-1 per eia 481-1 w 12.0 0.30 12.0 0.30 12.0 0.30 (0.472 0.012) (0.472 0.012) (0.472 0.012) p 0 4.0 0.10 4.0 0.10 4.0 0.10 (0.157 0.004) (0.157 0.004) (0.157 0.004) p 1 8.0 0.10 8.0 0.10 8.0 0.10 (0.315 0.004) (0.315 0.004) (0.315 0.004) p 2 2.0 0.05 2.0 0.05 2.0 0.05 (0.079 0.002) (0.079 0.002) (0.079 0.002) a 0 3.58 0.10 3.66 0.15 3.70 0.10 (0.141 0.004) (0.144 0.006) (0.146 0.004) b 0 4.93 0.10 4.98 0.10 5.10 0.10 (0.194 0.004) (0.196 0.004) (0.200 0.004) b 1 max. 5.9 5.9 5.9 (0.232) (0.232) (0.232) d 0 1.5 + 0.10/-0.0 1.5 + 0.10/-0.0 1.5 + 0.10/-0.0 (0.059 + 0.004/-0) (0.059 + 0.004/-0) (0.059 + 0.004/-0) f 5.5 0.05 5.5 0.05 5.5 0.05 (0.217 0.002) (0.217 0.002) (0.217 0.002) e 1 1.75 0.10 1.75 0.10 1.75 0.10 (0.069 0.004) (0.069 0.004) (0.069 0.004) e 2 min. 10.25 10.25 10.25 (0.404) (0.404) (0.404) t max. 0.6 0.6 0.6 (0.024) (0.024) (0.024) t 1 max. 0.1 0.1 0.1 (0.004) (0.004) (0.004) k 0 1.30 0.10 0.95 0.10 1.50 0.10 (0.051 0.004) (0.037 0.004) (0.059 0.004) leader min. 390 390 390 (15.35) (15.35) (15.35) trailer min. 160 160 160 (6.30) (6.30) (6.30) reel dimensions a max. 185 185 185 (7.28) (7.28) (7.28) n min. 50 50 50 (1.97) (1.97) (1.97) w 1 12.4 + 2.0/-0.0 12.4 + 2.0/-0.0 12.4 + 2.0/-0.0 (0.488 + 0.079/-0.0) (0.488 + 0.079/-0.0) (0.488 + 0.079/-0.0) w 2 max. 18.4 18.4 18.4 (0.724) (0.724) (0.724) mf-msmf series tape and reel speci cations b 1 n(hub dia.) (measured at hub) a t cover tape k 0 t 1 a 0 w 2 (measured at hub) w 1 p 1 b 0 f d 0 p 2 p 0 e 2 e 1 w dimensions: mm (inches) speci cations are subject to change without notice. users should verify actual device performance in their speci c applications. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time.
|
